Designed for handling large quantities of chemicals, providing a high protection level.

Total Operator Protection
Filtration safety: all the captair® toxicap fume hood models are compliant with the AFNOR NFX 15-211 Class 1 standard, OSHA regulation 1910:1450, CSA Z316.5, ANSI/AHA Z9.5 Class 1 DIN
12.927 Containment of the chemical vapors within the enclosure- guaranteed bythe face velocity monitor. Alarm system notification in case of ventilation failure. Sampling port and Chemical Detection Kit allow the user to perform filtersaturation testing. Acrylic door and front shield provide protection from chemical spills. (Fire classification, NF P.92.507 standard)

Ergonomics and Comfort
Arm openings designed to allow the operator a large range of movement within the enclosure. Upper and lower openings to provide easy access to all sizes of equipment. Ports for the introduction of electrical or power cables into the enclosure. Angled front sash offers excellent visibility of the chemical handling.
Very low noise level (56 dBA). Transparent panels and internal (2 x 18 w) lighting provide excellent viewing within the enclosure. Rolled edge provides an area to relax arms and wrists. Tempered glass work surface and spill retention tray may be removed for easy cleaning.

Toxicaps have two levels of molecular filtration: a main molecular filter and a safety back-up filter, separated by a detection chamber. When the main filter is saturated, it is replaced by the safety back-up filter and a new safety back-up filter is installed. This allows to increase the filter retention capacity by at least 30% and thus to save on filters.

If your application generates gases and aerosols without fumes, choose a Toxycap C model. If your application generates gases and aerosols with fumes, choose a Toxycap NU model.

Toxi 808:
External Dimensions - 34.3”W x 29.2”D x 43.6”H
Internal Dimensions - 32.5”W x 27.8”D x 34.2”H
Volume of Air Treated m3/hr - 160